S1 (Calpeda) Clean Water Pumps

Technical Data
Motor 0.45 HP
Pump Body Cast Iron
Motor Casing Aluminium
AMP 2.1 ~2.5Max
Frequency 50 Hz
Suction Lift 24 Feet
R.P.M 2850
Capacitor 10 UF
Max Head 60 Feet
Volts 200 ~220
Bearing 6201 ZZ
Max Water O/P 2200 Ltr/H
Impeller Brass
Motor Shaft Steel
Seal Mechanical Seal 12mm
Insulation Class F

ELECTRIC MOTOR:

The pumps are close-coupled to a carefully matched SHAHZAD electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty.

SINGLE PHASE:

220V - 50 Hz with capacitor of 10 µf and thermal overload protector built into the winding. (3-Phase is available on demand)

APPLICATIONS:

For suction up to 50 ft. Mist irrigation, dairy and farm applications, garden watering applications.

INSTALLATION AND USE:

They are recommended for pumping clean water without abrasive particles.

IMPORTANT NOTE:

The pumps must be installed in enclosed places, or at least protected against inclement weather.


Related Products

  • S2 (Steel Body)

    S2 (Steel Body)

  • S2+ (Newly Introduced)

    S2+

  • SP+ (Self Priming)

    SP+