Pak 2 Mono Pump (Special) 3HP

Technical Data
Motor Power 3.0 HP
Pump Body Cast Iron
Motor Body Cast Iron
AMP 8.2 Max
Frequency 50 Hz
Suction Lift 18 Feet
R.P.M 2850
Capacitor 20~25 UF
Max Head 70 Feet
Volts 200 ~220
Bearing 6203 ZZ
Max Water O/P 20000 Ltr/H
Impeller Brass, of the type with radial peripheral vanes.
Motor Shaft Steel
Seal Mechanical Seal
Insulation Class F

ELECTRIC MOTOR:

The pumps are close-coupled to a carefully matched SHAHZAD electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty.

SINGLE PHASE:

220V - 50 Hz with capacitor of 25µf and thermal overload protector built into the winding. (3-Phase is available on demand)

APPLICATIONS:

Horticultural irrigation, mist irrigation, dairy and farm applications, for pressurized circulation of water and for poultry sheds water circulation.

INSTALLATION AND USE:

They are recommended for pumping clean water (oil) without abrasive particles and liquids that are chemically non aggressive to the materials from which the pump is made.

IMPORTANT NOTE:

The pumps must be installed in enclosed places, or at least protected against inclement weather.


Related Products

  • SP+1 (Self Priming)

    SP+1

  • SP+3

  • Pak 3 Deep Well (New 3/4

    Pak3 Deep Well