Pak 2 Mono Pump(2" x 2") Stainless Steel on demand

Technical Data
Motor Power 2.0 HP
Pump Body Cast Iron
Motor Body Cast Iron
AMP 7.0 Max
Frequency 50 Hz
Suction Lift 18 Feet
R.P.M 2850
Capacitor 20~25 UF
Max Head 40 Feet
Volts 200 ~220
Bearing 6203-6204 ZZ
Max Water O/P 16000 Ltr/H
Impeller Brass, of the type with radial peripheral vanes.
Seal Mechanical Seal
Insulation Class F

ELECTRIC MOTOR:

The pumps are close-coupled to a carefully matched SHAHZAD electric motor, quiet running, totally enclosed fan cooled (TEFC), suitable for continuous duty.

SINGLE PHASE:

220V - 50 Hz with capacitor of 25µf and thermal overload protector built into the winding. (3-Phase is available on demand)

APPLICATIONS:

Pressurized water using pressure vessels (autoclaves), horticultural irrigation, mist irrigation, dairy and farm applications.

INSTALLATION AND USE:

They are recommended for pumping clean water (oil) without abrasive particles and liquids that are chemically.

IMPORTANT NOTE:

The pumps must be installed in enclosed places, or at least protected against inclement weather.


Related Products

  • SP+1 (Self Priming)

    SP+1

  • SP+3

  • Pak 2 Mono Pump (Special) 3HP

    Pak2 (Special)